Jye Tech Dso Shell Oscilloscope

Jye Tech Dso Shell Oscilloscope. Simplicity in structure and easiness in assembly/operation are among the main targets of the design. This is a fully assembled dso shell (dso150) oscilloscope, an upgraded form of the popular dso138.

Buy JYE Tech DSO Shell(DSO150) 2.4" TFT Handheld
Buy JYE Tech DSO Shell(DSO150) 2.4" TFT Handheld from www.aliexpress.com

Make sure pins are aligned to pads solder the pin at the opposite corner so as chip is fixed Jyetech 'dso shell' oscilloscope diy kit w/enclosure & clip probe by nooelec. Dso 112a jye tech digital oscilloscope with bnc probe kit (43.5% similar) 7v lcd backlight on.

Dazu Muss Die Pid Per Mail An Jye Tech Gesendet Werden.

5mv/div sensitivity and low background noise make the device particularly useful for measuring weak signals. 15001k, 15002k how to solder smd parts apply solder to one pad solder part to the pad solder the other pad apply solder to a corner pad solder ic to the pad. The difference between them is mainly on the analog board.

Simplicity In Structure And Easiness In Assembly/Operation Are Amongst The Main Highlights Of The Design.

4 color tft lcd with 320 x 240 resolutionpower supply3. I removed the voltage regulators from both this, and the board without the short. Jye tech dso150 oscilloscope troubles.

10Us 500S Div Record Length:

07 dso shell diy kit applicable models: A nice little ‘scope within the limitations of the stm32f103c8 microcontroller that drives it. Dso138 was designed as a training oscilloscope kit.

Jye Tech Dso Shell Oscilloscope Hex Code (Read 3441 Times) 0 Members And 1 Guest Are Viewing This Topic.

1m ohm maximum input voltage: It contains only the basic oscilloscope functions with no fancy features. Jye tech dso shell 150 oscilloscope diy kit.

Make Sure Pins Are Aligned To Pads Solder The Pin At The Opposite Corner So As Chip Is Fixed

April 02, 2019, 05:39:12 pm ». Hätte ich diese info nicht zufällig im netz gefunden, dann hätte ich das ding wohl als schrott zurück gesendet. Dso150 i have the most enjoyment in ham radio, and in electronics in general, when i make or acquire devices that give top performance at minimum cost: